Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Skoda
  4. :
  5. Octavia
  6. : How do I remove the door panel from the Å koda Octavia?

Skoda Octavia - Video tutorial

Model: Skoda Octavia MK 3, 5E - Years 2012-2019
Part: Door
Operation: How do I remove the door panel from the Å koda Octavia?

In order to remove the door panel of the Å koda Octavia, you must use an object that acts as a lever to be able to remove the retaining clips of the lower part of the panel. Subsequently, with the same object, it will be necessary to lift the plastic cover of the handrail in order to access the screws below. These must be loosened and once removed it will be possible to detach the panel from the door, after having removed the relative connectors. Therefore, the new panel can be connected to the relative connectors and fixed to the door by inserting the appropriate fixing screws and clips.


Posted on 29 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos