Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Kodiaq
    4. : How do I replace the battery in the remote control of the Å koda Kodiaq?

Skoda Kodiaq - Video tutorial

Model: Skoda Kodiaq MK 1 - Years 2017-2023
Part: Key
Operation: How do I replace the battery in the remote control of the Å koda Kodiaq?

In order to replace the remote control battery of the? Koda Kodiaq you have to remove the key from the top, pulling it from the final plastic part. Once the key has been removed from its housing, it will be necessary to pry inside it in order to remove the cover of the rear part of the remote control. Under the cover, you will find the battery, which will need to be taken out and replaced with a new spare part. By inserting the new battery, it will be possible to close the remote control with the special cover on the back and insert the key from the top.


Posted on 24 May 2024 by ScegliAuto



How do I replace the battery in the remote control of the Å koda Kodiaq?
Skoda Kodiaq (2017-2023 / MK 1) In order to replace the battery in the remote control of the Å koda Kodiaq, you have to lift the ignition key by pressing the special button at the t
How to replace the battery of the Keyless remote control of the Skoda Kodiaq
Skoda Kodiaq (2017-2023 / MK 1) Should the remote control battery of your Skoda Kodiaq run out, you may have difficulty accessing the vehicle and starting it as the keyless system n
How to replace the battery of the Skoda Kodiaq remote control.
Skoda Kodiaq (2017-2023 / MK 1) In today's video, we will see how to replace the battery in the key remote of the Skoda Kodiaq. This tutorial is also applicable to other models of t

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos