Do it yourself
Frequently asked questions about cars and motorcycles

How to Manually Disable the Passenger Airbag on the Skoda Rapid

Model: Skoda Rapid MK 1 - Years 2012-2019
Part: Airbag

Before discovering how to manually disable the passenger airbag in your Skoda Rapid, remember that this operation should only be performed in case of malfunctions of the component itself. First, go inside the car and ensure it is turned off. Then, reach the passenger side and open the glove compartment. Locate the airbag button on the left side and insert the key into the designated slot. Turn the mechanism clockwise to disable the airbag and counterclockwise to reactivate it. Finally, close the glove compartment.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Skoda Rapid (2012-2019 / MK 1) How to remove the airbag from a Skoda Rapid? Disconnect the battery terminals located in the engine compartment. Use a screwdriver to release/unscrew…
Skoda Rapid (2012-2019 / MK 1) To manually reset the service light on your Skoda Rapid, you only need a few seconds. Follow these steps to complete the process. First, enter the ca…
Skoda Rapid (2012-2019 / MK 1) Using the method explained below, you can manually reset the engine oil light on your Skoda Rapid without the need for a professional. First, enter t…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos