Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Bumper Reflector

Model: Skoda Octavia MK 2, 1Z - Years 2004-2012
Part: Rear bumper

If the reflective element at the lower right edge of the bumper is broken, it can be replaced easily and quickly as it is simply clipped into place with plastic tabs. To remove the damaged reflector, leverage along the edges with a screwdriver (it is advisable to apply masking tape to the tip to avoid scratching the paint). Align the fixing tabs of the new reflector with the respective slots on the bumper and press until it clicks into place.

Updated on 18 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Removing the Rear Bumper of a Skoda Octavia
Removing the Rear Bumper of a Skoda Octavia
Skoda Octavia (2004-2012 / MK 2, 1Z) Is the bumper of the Skoda Octavia irreparably damaged? Here's how to remove it. Open the tailgate; using a screwdriver or battery-powered drill, uns…
How to Replace the Rear Bumper Reflector on a Skoda Octavia
How to Replace the Rear Bumper Reflector on a Skoda Octavia
Skoda Octavia (2012-2019 / MK 3, 5E) In this guide, we will discover the instructions to remove and replace the rear bumper reflector on a Skoda Octavia. First, move to the rear of the v…
How to Replace the Rear Bumper Reflector on the Skoda Octavia
How to Replace the Rear Bumper Reflector on the Skoda Octavia
Skoda Octavia (2012-2019 / MK 3, 5E) Today's instructions will show you how to remove and replace the rear bumper reflector on the Skoda Octavia by following these simple steps. First, m…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos