Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Škoda Citigo

Model: Skoda Citigo MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Spark plugs

Video tutorial

To replace the spark plugs on a Škoda Citigo, open the bonnet to access the components inside the engine bay. Locate the coils just below the windscreen, disconnect them from their respective cables, and remove them from their housing by unscrewing the fixing screws.

Once the coils are removed, you can find the underlying spark plugs, which should be extracted using a socket wrench.

This will allow you to fit the new replacement parts and check that everything functions correctly.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on a Škoda Citigo
How to Replace the Wiper Blades on a Škoda Citigo
Skoda Citigo (2011-2020 / MK 1) You can replace the wiper blades on a Škoda Citigo by lifting the arms that control their movement. Once the arms are lifted, you can bend the blades…
How to Reset the Service Light on a Škoda Citigo?
How to Reset the Service Light on a Škoda Citigo?
Skoda Citigo (2011-2020 / MK 1) You can completely eliminate the Service light from the dashboard of the Škoda Citigo by holding down the button located at the bottom centre of the …
How to Open the Fuel Cap on a Škoda Citigo
How to Open the Fuel Cap on a Škoda Citigo
Skoda Citigo (2011-2020 / MK 1) To open the fuel cap on a Škoda Citigo, apply a small pressure on the side of the flap so that it opens, granting access to the cap underneath. The c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos