Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Skoda
  4. :
  5. Octavia
  6. : How to replace the spark plugs in a Skoda Octavia 2 1.8 TSI.

Skoda Octavia - Video tutorial

Model: Skoda Octavia 1Z, MK 2 - Years 2004-2012
Part: Spark plugs
Operation: How to replace the spark plugs in a Skoda Octavia 2 1.8 TSI.

In this video tutorial, we can see how to replace the spark plugs in a Skoda Octavia 2 1.8 TSI: get inside the car, turn off the engine, and engage the handbrake; the next step is to lift the hood and secure it with a special rod. Remove the engine cover to access the spark plugs. Disconnect the coil power supply by lifting the connector support tab and pulling up the terminal. Gently remove the coils. Use a vacuum cleaner to clean around the coil housing. Use a 16mm socket wrench with an extension to unscrew the spark plugs. Once the spark plugs are unscrewed, install the new spark plugs and tighten them with a torque wrench according to the manufacturer's instructions. Reassemble all the parts in reverse order.


Posted on 19 September 2023 by ScegliAuto



How to replace spark plugs in a Skoda Octavia
Skoda Octavia (2004-2012 / 1Z, MK 2) In this video tutorial we can see how it is possible to replace the spark plugs in a Skoda Octavia by following a few simple steps: the first thing t
How to replace the glow plugs in the Skoda Octavia?
Skoda Octavia (2012-2019 / MK 3, 5E) In this tutorial we can see how to replace the glow plugs in the Skoda Octavia. First of all we open the bonnet and remove the plastic cover, then we
Skoda Octavia 2 1.6 TDI glow plug replacement
Skoda Octavia (2004-2012 / 1Z, MK 2) Let's see in this video how to remove and replace the engine glow plugs of a second series Skoda Octavia, powered by 1.6 TDI. We open and lift the bo

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos