Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Enyaq Iv
    4. : What is the fuse layout of the Skoda Enyaq iV?

Skoda Enyaq Iv - Video tutorial

Model: Skoda Enyaq Iv MK 1 - Years 2020-2024
Part: Fuse box
Operation: What is the fuse layout of the Skoda Enyaq iV?

If one of the devices in our Skoda Enyaq iV suddenly stops working, we can first check the status of the corresponding fuses whose diagrams are indicated in this video. The first box is located inside the cabin, precisely in the lower area of the dashboard on the driver's side. The second box is instead positioned inside the engine compartment, protected by the black plastic cover near the battery. In case of a blown fuse, make sure to use a replacement with equivalent specifications and operate with the vehicle turned off to avoid causing damage.


Posted on 18 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos