Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Skoda Octavia 2017

Model: Skoda Octavia MK 3, 5E - Years 2012-2019
Part: Service warning light

Typically, the oil light on the instrument cluster of your Skoda Octavia Mk3 (2017) turns off automatically after an oil change. If it does not, you must follow this manual reset procedure. First, enter the cabin and reach the driver's seat. Then, with the ignition off, press and hold the central "0.0/Set" button and start the dashboard. Wait a moment, then release the button and press it again to confirm the reset of the oil light. Finally, turn off the ignition.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Skoda Octavia 3
How to Reset the Oil Light on the Skoda Octavia 3
Skoda Octavia (2012-2019 / MK 3, 5E) To reset the oil light on your Skoda Octavia Mk3, it only takes a few seconds. This procedure can be performed by anyone without any difficulty, and …
How to Reset the Oil Light on a 2018 Skoda Octavia
How to Reset the Oil Light on a 2018 Skoda Octavia
Skoda Octavia (2012-2019 / MK 3, 5E) To manually reset the oil light that keeps illuminating on the dashboard of your 2018 Skoda Octavia, you only need a few minutes. With the following …
How to Reset the Warning Light on a Skoda Octavia
How to Reset the Warning Light on a Skoda Octavia
Skoda Octavia (2012-2019 / MK 3, 5E) Want to reset the warning light on your Skoda Octavia? Here's how to reset the oil warning light. Enter the vehicle, press and hold the button near t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos