Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Octavia
    4. : How to deactivate the passenger airbag in the Skoda Octavia

Skoda Octavia - Video tutorial

Model: Skoda Octavia MK 4, NX - Years 2019-2024
Part: Airbags
Operation: How to deactivate the passenger airbag in the Skoda Octavia

If you feel it is necessary to deactivate the passenger airbag, I recommend following these steps: Turn on the car and make sure the engine is off. Look for the passenger airbag deactivation button. Usually, it is located on the dashboard or on the passenger side panel. It may be marked with a label indicating "AIRBAG OFF" or similar. Press the passenger airbag deactivation button. Sometimes, you may need to use a tool, such as a key, to turn or lift the button. After pressing or turning the deactivation button, you should see an indicator or light on the dashboard confirming that the passenger airbag has been deactivated. This could be an icon of an airbag with a line through it or a message indicating that the passenger airbag is deactivated.


Posted on 2 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Octavia 2019-2026 - What does the Å koda Octavia airbag light mean? Read Answer
    • Octavia 2004-2012 - Why is the Skoda Octavia reporting an airbag problem? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos