Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Octavia
    4. : How to remove the door panel of the Skoda Octavia

Skoda Octavia - Video tutorial

Model: Skoda Octavia 1Z, MK 2 - Years 2004-2012
Part: Door panel
Operation: How to remove the door panel of the Skoda Octavia

Disassembling the door panel of a Skoda Octavia model 2 is a very simple operation and easily achievable on your own. Removing a panel gives you access to the inside of the door, allowing you to remove the speakers or the lock. Start disassembling the panel by removing the six screws that hold it in place. The first three screws are located under the handle cover. The fourth screw is located on the door handle. The last screws are located on the bottom of the door. Before removing the screws, we need to detach the plastic parts using a lever tool. As shown in the video, we can remove the screws. Finally, detach the panel by pulling it out and then disconnect the connector.


Posted on 24 March 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos