Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Skoda Fabia 2

Model: Skoda Fabia 5J, Mark2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, we will see how to reset the maintenance light on the Skoda Fabia 2. This procedure is needed after performing a service if the light remains on; no tools or software are required for the reset. To reset the light, insert the key without turning it, then press the 0.0 button on the instrument cluster.

While holding it, start the cluster without starting the engine, keep it pressed for about 10 seconds, then press the button next to the 0.0 button, and the reset will be complete. Now, when starting the instrument cluster, the service light will no longer be present.


Updated on 25 September 2026 by ScegliAuto


Related tutorials

How to Perform a Service Reset on a Skoda Fabia TSI
How to Perform a Service Reset on a Skoda Fabia TSI
Skoda Fabia (2007-2014 / 5J, Mark2) To perform a service reset on a Skoda Fabia TSI, follow a few simple steps. During the procedure, you will only use the two clearly visible buttons o…
Where is the fuse box of the Skoda Fabia located?
Where is the fuse box of the Skoda Fabia located?
Skoda Fabia (2007-2014 / 5J, Mark2) If you are curious to find out where the fuse box is located inside your Skoda Fabia, then just follow the steps described in the following guide and…
Reset the service reminder of the Skoda Fabia.
Reset the service reminder of the Skoda Fabia.
Skoda Fabia (2014-2021 / Mark3, NJ) Today we will see the necessary information in order to reset the service maintenance reminder for the oil change of the Skoda Fabia. First, we get i…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos