|
Do it yourself
| |||
| ||||
How to reset the tire warning light in the Smart ForTwo?
Model: Smart Smart
453
- Years 2014-2022
In this tutorial, we will see how to reset the tire warning light in the Smart ForTwo, an extremely simple and quick operation that should be done only once the correct pressure for each tire has been restored, following the instructions in the manual. First, let's go inside the cabin, then insert the key and turn on the instrument panel. Next, scroll through the various information on the display using the upper button on the right lever, reach the screen showing the icon of the warning light in question, and hold down the "OK" button until the reset is complete.
Posted on 4 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Smart
(1998-2007 /
450)
To reset the tire pressure light on a Smart ForTwo, start by turning on the instrument panel without starting the engine. Look for the reset button l…
Smart
(2014-2021 /
)
In today's video we will see how the parameter corresponding to the tire temperature sensor in the Smart Fortwo is reset. We recommend carrying out t…
Smart
(2014-2022 /
453)
This short video will teach us how to reset the tire pressure warning light in a Smart Fortwo. Turning on of the aforementioned warning light indicat…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.104
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
