Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Wiper Control Lever from a Smart Fortwo

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Windshield wipers

See other generations:
Video tutorial

Have you encountered issues with the wiper control lever on a Smart Fortwo? Let’s see how to proceed with the removal in this video. First, disconnect the battery cables located in the engine compartment.

Next, unscrew the screws located at the bottom of the car's steering wheel. Remove the trim plastics from the steering wheel.

Once the plastics are removed, pull the wiper lever piece towards you from above the indicator stalk, taking care not to damage it (disconnect the large power connector). Prepare to refit the new part in reverse order.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

Replacing the Wiper Blades on the Smart Fortwo 451
Replacing the Wiper Blades on the Smart Fortwo 451
Smart (2007-2015 / 451) In this short and simple video, learn how to remove and replace the wiper blades on the Smart Fortwo 451, as well as the 453. First, move to the fron…
How to Replace the Wiper Blades on a Smart ForTwo?
How to Replace the Wiper Blades on a Smart ForTwo?
Smart (2014-2022 / 453) As seen in this tutorial, replacing the wiper blades on a Smart ForTwo is an extremely simple and quick task. First, switch off the vehicle and lift …
Windshield Replacement on the Smart Fortwo 451
Windshield Replacement on the Smart Fortwo 451
Smart (2007-2015 / 451) In this video tutorial, learn how to remove and replace the windshield on the Smart Fortwo 451 by following the instructions below. First, remove the…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos