Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Smart Fortwo rear light bulbs replacement

Model: Smart Smart 450 - Years 1998-2007
Part: Tail light bulb

In this video we will go to see how to replace the bulb of the very small Smart Fortwo 450. To begin with, take a 10mm socket wrench and unscrew the two side screws that hold the light: at this point we can already extract the whole light. Disconnect the wiring connector and at this point remove the headlight frame by acting on the plastic levers (pressing them). Now press the tabs of the lamp holder and separate from the outer shell: this way you will have access to all the lamps. Simply rotate the bulb slightly to be able to exit the lighthouse.

Posted on 24 June 2020 by ScegliAuto

Video tutorial

Related tutorials

Smart Fortwo rear light bulb replacement
Smart Fortwo rear light bulb replacement
Smart (2007-2015 / 451) Let's see in this short guide how to remove and replace the Smart Fortwo taillight bulbs, following the instructions below. First we open the rear do…
Smart Fortwo rear light bulbs replacement
Smart Fortwo rear light bulbs replacement
Smart (2007-2015 / 451) Today we will see how to remove and replace the rear light bulbs of a second series Smart Fortwo. First we go to open the tailgate and remove the sid…
Smart Fortwo rear light bulb replacement
Smart Fortwo rear light bulb replacement
Smart (2007-2015 / 451) Today we will see how to remove and replace the rear light bulbs in a second generation Smart Fortwo. First of all we go to open the tailgate of the …

Other guides you may be interested in

How to Replace the Window Regulator on the BMW X3

Replacing the window regulator mechanism requires removing the door panel and the aluminum underpanel to access the mechanism itself. Remove the motor and loosen the glass retaining clips to complete the removal of the window regulator. Attach the motor to the new mechanism and insert the assembled unit back into the door, securing it with the appropriate nuts. Then, insert the glass and tighten the clips, completing the installation by connecting the motor's power connector and performing a functionality check before reassembling all other components.

Watch the video!


by ScegliAuto

More videos