Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How to disassemble alternator on Smart 451

Smart - Video tutorial

Model: Smart Smart 450 - Years 1998-2007
Part: Alternator
Operation: How to disassemble alternator on Smart 451

Let's see how to remove the damaged alternator of the Smart Fortwo. We lift the car on a jack and remove the rear wheel in conjunction with the part where the alternator is mounted. We remove the plastic lining in the lower part of the mudguard (stone guard), we arrive at the alternator placed under the engine compartment. We disassemble the alternator and its belt. We remove the damaged alternator and mount a new one (same size and voltage). At the end of the assembly of the alternator we just have to mount all the plastic coatings of the car with attached tightening screws. We test the correct charging of the battery by the new alternator.


Posted on 28 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Smart 1998-2007 - Where is the alternator fuse located in the Smart car? Read Answer
    • Smart 2007-2015 - What problems does the Smart alternator cause? Read Answer
    • Smart 2007-2015 - Problems with the alternator on the Smart? Read Answer
    • Smart 2014-2022 - How much does the Smart alternator cost? Read Answer
    • Smart 1998-2007 - What is the problem with the Smart Fortwo CDI alternator? Read Answer
    • Smart 1998-2007 - What problems can the Smart 450 alternator present? Read Answer
    • Smart 1998-2007 - How to recognize an alternator problem in the Smart ForTwo? Read Answer
    • Smart 1998-2007 - What to do if the Smart alternator has problems? Read Answer
    • Smart 2007-2015 - The Smart does not start, what could be the reasons? Read Answer
    • Smart 2007-2015 - How much does the Smart mhd alternator cost? Read Answer
    • Smart 1998-2007 - How much does the alternator cost for the Smart diesel? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos