|
Do it yourself
| |||
| ||||
Instructions for removing the starter motor on the Smart Fortwo 450
Model: Smart Smart
450
- Years 1998-2007
Let's find out the procedure needed to disassemble and replace the starter motor on the Smart Fortwo 450, first series, by following the instructions below. First of all we lift the car and start by removing the service belt; now remove the alternator, so as to be able to access the starter motor, by unscrewing the fixing screws. At this point we unscrew all the screws of the starter motor, disconnecting the power cable, in order to remove it; we just have to replace it with the new one, applying the reverse procedure for reassembly!
Posted on 14 October 2021 by ScegliAuto
This video is currently unavailable
Related tutorials
Smart
(1998-2007 /
450)
In this video tutorial, we will see the main steps useful for disassembling and replacing the starter motor of the Smart Fortwo 0.8 CDI. First, we op…
Smart
(1998-2007 /
450)
In the Smart Fortwo 450, the first series, there are two fuse boxes, one located under the dashboard on the driver's side and the other under the sea…
Smart
(1998-2007 /
450)
Today we will see the guide that will allow us to disassemble and replace the starter motor of the Smart Fortwo. First of all, we open the rear hatch…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Spark Plugs from a Volkswagen Up
How to remove and replace the spark plugs on a Volkswagen Up? Follow these steps for proper removal. Pull the lever to open the engine compartment and lift the front bonnet, securing it in place. Remove the plastic soundproofing panel on the cylinder head, then disconnect the power connectors using a screwdriver after unscrewing them with a socket wrench. Pull off the coils by hand and unscrew the spark plugs with the socket wrench, finally pulling them out of the cylinder head. Take the new spark plugs and guide them into the engine head using the extension of the socket wrench. Finally, tighten the spark plugs securely and reconnect the respective power connectors. To finish: reassemble the soundproofing panel and close the engine bonnet. - Socket wrench with sockets - Flat or screwdriver bits - Battery-powered screwdriver - Protective gloves. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.068
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
