Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS indicator on the Smart 451

Model: Smart Smart 451 - Years 2007-2015
Part: Tire pressure warning light

In the following mini guide we will explain how to correctly and easily reset the TPMS warning light inside your Smart 451. Before starting, make sure you have closed all the doors and activated the handbrake. Then insert the key and turn on the car ignition. Then, using the appropriate directional arrow, scroll down the menu and enter the "Settings" item. Click on "Check tire pressure" and confirm the operation as soon as you are asked. A few moments after the reset is complete and you can exit the menu.

Posted on 24 February 2022 by ScegliAuto

Video tutorial

Related tutorials

To reset the service indicator of the Smart 451.
Smart (2007-2015 / 451) If even after performing the regular maintenance of your Smart 451 (year 2007-2015) you notice that the alarm light continues to turn on on the dashb…
How to reset the service light of the Smart ForTwo 451
How to reset the service light of the Smart ForTwo 451
Smart (2007-2015 / 451) In the following guide dedicated to your Smart ForTwo 451 (2007-2015) we will give you all the necessary information so that you can manually reset t…
How to reset the service indicator on a Smart 451
How to reset the service indicator on a Smart 451
Smart (2007-2015 / 451) Let's see how to reset the service light on a Smart 451: the car must be turned off; press and hold the "ok" button located on the left side of the b…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos