Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Airbag in a Smart ForTwo?

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Airbag

See other generations:
Video tutorial

In this video, you can see how to remove the steering wheel airbag in the Smart ForTwo, a very simple operation. First, ensure you disconnect the battery to work safely.

To remove the airbag, first take off the steering wheel by undoing the single bolt located at the bottom and then disconnect the connectors. Once done, remove the rear cover, unclip the horn plastic, and unscrew the two fixing screws of the airbag.

Finally, extract the airbag and disconnect the yellow power connector.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

Removing the Steering Wheel of the Smart Fortwo
Removing the Steering Wheel of the Smart Fortwo
Smart (2007-2015 / 451) We will briefly see how to remove and replace the steering wheel and its airbag on the Smart Fortwo in simple steps. First, get into the vehicle and …
How to install the steering wheel airbag of the 2016 Smart Fortwo
How to install the steering wheel airbag of the 2016 Smart Fortwo
Smart (2014-2022 / 453) Today we will explain how to mount the steering wheel airbag on a 2016 Smart Fortwo car. Before performing this operation, it is necessary to check t…
How to Remove the Steering Wheel Airbag in a Smart?
How to Remove the Steering Wheel Airbag in a Smart?
Smart (1998-2007 / 450) In today's video, you will see how to remove the airbag from the Smart Fortwo, specifically how to remove the driver-side device installed in the ste…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos