Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the clutch on the Smart 453?

Model: Smart Smart 453 - Years 2014-2022
Part: Clutch

In order to replace the clutch of the Smart 453, the car must be lifted via a bridge so that its lower part can be accessed. Here it will be necessary to drain the oil inside the gearbox by unscrewing the drain plug. Subsequently, it will be necessary to access the part of the engine compartment, unscrewing the screws that secure the air filter box and then those that secure the gearbox. Furthermore, by removing the right front wheel and its shock absorber, the last bolts that fix the gearbox can be unscrewed; the latter can therefore be extracted allowing the clutch to be replaced.

Posted on 4 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the clutch on Smart 453
How to replace the clutch on Smart 453
Smart (2014-2022 / 453) Let's see how to replace the clutch on the Smart 453. To access the clutch, first of all, you need to disassemble the rear bumper of your car, unscre…
How does the dual-clutch transmission of the Smart 453 work?
How does the dual-clutch transmission of the Smart 453 work?
Smart (2014-2022 / 453) In this video, we are shown how the dual-clutch transmission works in the Smart 453. It is composed of a single unit with two clutches. There are two…
How to replace the gear knob on a Smart 453
How to replace the gear knob on a Smart 453
Smart (2014-2022 / 453) Thanks to this short video tutorial, let's see how to replace the gear knob of a Smart 453, a model in production from 2014 to 2022. This operation i…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos