Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Radiator Fluid on a Smart 450

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Antifreeze coolant

See other generations:
Video tutorial

Replacing the radiator fluid on a Smart 450 is a task you can do at home using some specific tools. First, purchase the new antifreeze of the specific colour required; ask your parts supplier.

Next, place the car jack under the front left wheel and turn the handle until you have comfortable access to work under the engine. Get an old bucket to drain the used fluid and use a long hex key to unscrew the corresponding screw on the radiator tank.

Unscrew the top-up cap to allow air into the system and completely empty it. After that, you can tighten the screw on the tank and top up the necessary amount of fluid from the bonnet. Dispose of the used fluid properly at an authorised workshop.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to Check the Coolant Level on Smart 450
How to Check the Coolant Level on Smart 450
Smart (1998-2007 / 450) In this video tutorial, you can see how to check the coolant level on a Smart 450. First, go to the front of your car where you will see two grilles …
How to Top Up the Windscreen Washer Fluid on Smart 450?
How to Top Up the Windscreen Washer Fluid on Smart 450?
Smart (1998-2007 / 450) To top up the windscreen washer fluid on the Smart 450, first loosen the bolt securing the grille just below the windscreen on the left side. Once th…
How to Remove the Heater Radiator in the Smart ForTwo 450?
How to Remove the Heater Radiator in the Smart ForTwo 450?
Smart (1998-2007 / 450) In this video tutorial, you will see how to remove the heater radiator in the Smart ForTwo 450. To do this, you need to disassemble the entire front …

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos