Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speakers in the Smart Roadster?

Model: Smart Smart Roadster, 452 - Years: 2003, 2004, 2005
Part: Speaker

See other generations:
Video tutorial

In this tutorial, see how to replace the speakers in the Smart Roadster, a very simple and quick operation. First, ensure the key is not in the ignition, then open the door where you will be working and, using a plastic spatula, carefully unclip the speaker cover.

Next, undo the four fixing screws using a T20 Torx spanner, separate the speaker from the mount, and disconnect the two internal connectors. At this point, simply connect the replacement and install it by following the reverse procedure.


Updated on 12 September 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light and Bulbs of the Smart Roadster
How to Replace the Rear Light and Bulbs of the Smart Roadster
Smart (2003-2005 / Roadster, 452) Below are the main steps to remove and replace the rear light and its bulbs of the Smart Roadster. First, move to the rear of the vehicle and start o…
How to Adjust the Clutch on a Smart Roadster?
How to Adjust the Clutch on a Smart Roadster?
Smart (2003-2005 / Roadster, 452) To adjust the clutch on a Smart Roadster, you need to modify the settings of the control unit. To do this, connect a diagnostic tool to the vehicle's…
Removing the Intake Duct of the Smart Roadster
Removing the Intake Duct of the Smart Roadster
Smart (2003-2005 / Roadster, 452) This guide explains how to remove the main intake duct of the Smart Roadster, following the instructions below. First, access the engine bay and star…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos