Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Ssangyong Korando?

Model: SsangYong Korando MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

In order to reset the tire pressure warning light on the Ssangyong Korando, you need to check which tires are not at the correct pressure level: you can identify the tires in question by accessing the menu that will be displayed on the instrument panel.

Once the wheels have been identified, you can read the recommended pressure value indicated on the sticker attached to the driver's side door pillar: by inflating the tires to the recommended pressure value, you will notice that the tire pressure warning light will turn off completely.


Posted on 14 March 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Ssangyong Korando?
How to Reset the Service Light on a Ssangyong Korando?
SsangYong Korando (2019-2026 / MK 4) The Ssangyong Korando is also equipped with a service expiry light, which reminds the driver that a service, including oil, filters, timing belt, and…
How to Reset the Service Light on a Ssangyong Korando
How to Reset the Service Light on a Ssangyong Korando
SsangYong Korando (2019-2026 / MK 4) The instructions in this guide will allow you to reset the service light for routine maintenance (engine oil change) on the Ssangyong Korando. First,…
Where is the fuse box located in the Ssangyong Korando 3?
Where is the fuse box located in the Ssangyong Korando 3?
SsangYong Korando (2010-2019 / MK 3) With this guide, you can finally locate the fuse box inside your Ssangyong Korando third series (2010-2019) in just a few seconds and safely. The fir…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos