Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ssangyong Korando

Model: SsangYong Korando MK 4 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

The instructions in this guide will allow you to reset the service light for routine maintenance (engine oil change) on the Ssangyong Korando. First, get into the vehicle and turn on the instrument panel; using the steering wheel controls, navigate to the vehicle settings and then to the engine oil section, confirming and executing the reset of the maintenance light and the service mileage counter, as shown in the video.

Finally, turn off the ignition and start the engine, thus completing the reset operation!


Posted on 3 February 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Ssangyong Korando?
How to Reset the Service Light on a Ssangyong Korando?
SsangYong Korando (2019-2026 / MK 4) The Ssangyong Korando is also equipped with a service expiry light, which reminds the driver that a service, including oil, filters, timing belt, and…
How to Reset the Tyre Pressure Light on a Ssangyong Korando
How to Reset the Tyre Pressure Light on a Ssangyong Korando
SsangYong Korando (2010-2019 / MK 3) Let’s see how to reset the tyre pressure light on the Ssangyong Korando: keep an eye on the speedometer display. There are two icons indicating a tyr…
How to Reset the Service Light on a 2021 Ssangyong Korando
How to Reset the Service Light on a 2021 Ssangyong Korando
SsangYong Korando (2019-2026 / MK 4) If you own a 2021 Ssangyong Korando and want to learn how to correctly and safely perform a manual reset of the service light, simply follow these in…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos