Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Subaru XV

Model: Subaru Xv MK 1 - Years 2012-2017
Part: Headlight bulb

In this video tutorial, we will see how to disassemble and replace the bulbs of the front headlight of the Subaru XV. First, we open the hood of the car and start by removing the plastic cover found on the top, taking off all the clips; then we remove the ventilation ducts to access the back of the headlight, as shown in the video. At this point, we disconnect the electrical connector of the bulbs to remove and replace the light with a new one, of the correct type and with the same attachment; then we reassemble the plastic cover!

Posted on 13 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb in the Subaru Crosstrek XV?
How to replace the headlight bulb in the Subaru Crosstrek XV?
Subaru Xv (2012-2017 / MK 1) To replace the bulb in the Subaru Crosstrek XV, open the bonnet to access the engine compartment. At this point, remove the connector attached to the…
How to replace the front fog light bulb of the Subaru XV
How to replace the front fog light bulb of the Subaru XV
Subaru Xv (2012-2017 / MK 1) Below we will see the main instructions useful for disassembling and replacing the front fog light bulb of the Subaru XV, Crosstrek version. First of…
How to Replace the Battery in a Subaru XV?
How to Replace the Battery in a Subaru XV?
Subaru Xv (2012-2017 / MK 1) To replace the battery in a Subaru XV, open the bonnet to access the engine bay: the battery is located inside, near the left front headlamp. To remo…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos