Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Subaru Outback?

Model: Subaru Outback MK 6, BT - Years 2020-2025
Part: Service warning light

To reset the "Service" light on a Subaru Outback, start by turning on the instrument panel without starting the engine. Use the central touch screen to access the main menu of the infotainment system. Once in the menu, look for and select the section dedicated to vehicle settings or maintenance. Within this section, you should find an option related to service intervals management. Select the option for resetting maintenance intervals. The system will ask you to confirm the operation, and you will need to do so by touching the appropriate button on the screen. At this point, the reset process will happen automatically, and the "Service" light will turn off, indicating that the system has recorded the new maintenance interval. After completing the procedure, turn off and on the instrument panel to verify that the light has been properly reset. If the light remains on, it is advisable to repeat the process, making sure to follow each step accurately.

Posted on 27 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Subaru Outback
How to Reset the Tyre Pressure Warning Light on a Subaru Outback
Subaru Outback (2009-2014 / MK 4, BM, BR) Before you begin, exit the cabin of your Subaru Outback. Start by checking and inflating the car's tyres until they all reach the correct pressure. N…
How to Reset the Oil Service Light in a Subaru Outback?
How to Reset the Oil Service Light in a Subaru Outback?
Subaru Outback (2014-2019 / BS, MK 5) In the Subaru Outback, after changing the oil and filter, you need to manually remove the relevant warning light and reset the maintenance interval. …
…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos