Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the tire pressure light on the Subaru Outback?

Model: Subaru Outback BS, MK 5 - Years 2014-2019
Part:

To reset the tire pressure light on the Subaru Outback, you will need to inflate the tires until they reach the correct pressure value: this value will be indicated on the sticker that is attached to the driver's side door pillar. After inflating, you will need to start the engine and drive for a few kilometers: this will help the tire pressure sensors to work properly, as they will read the new values and make the light disappear. Once the reading procedure is complete, you can also turn off the engine completely.

Posted on 5 September 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

Subaru Outback (2009-2014 / MK 4, BM, BR) Before you begin, exit the cabin of your Subaru Outback. Start by checking and inflating the car's tyres until they all reach the correct pressure. N…
Subaru Outback (2014-2019 / BS, MK 5) To completely eliminate the tire pressure warning light that appears on the instrument panel of the Subaru Outback, first inflate the tires until the…
Subaru Outback (2014-2019 / BS, MK 5) The tire pressure warning light on the Subaru Outback can be completely reset by inflating the tires to the optimal pressure level indicated on the s…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos