Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Key Fob Battery for Subaru Outback

Model: Subaru Outback BR, BM, MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

Follow this guide to replace the battery in a Subaru Outback remote key fob. Obtain a CR1620 battery, preferably Duracell. Using a flathead screwdriver, open the key shell from the side with the keyring attachment.

Use a small flathead screwdriver to open the internal shell of the remote, releasing the two tabs on the sides. Open the shell and remove the old battery, noting the orientation.

Use the small screwdriver to lift the metal tabs for a proper connection. Reassemble everything as it was disassembled.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Subaru Outback?
How to Replace the Remote Battery of the Subaru Outback?
Subaru Outback (2009-2014 / BR, BM, MK 4) Replacing the remote battery of the Subaru Outback, as shown in this tutorial, is an extremely simple and cost-effective task. You will only need a r…
How to Replace the Remote Battery in a Subaru Outback?
How to Replace the Remote Battery in a Subaru Outback?
Subaru Outback (2014-2019 / BS, MK 5) Replacing the remote battery in a Subaru Outback is a straightforward and cost-effective task. You only need a replacement CR2032 battery. First, ext…
Replacement of the battery for the Subaru Outback key remote.
Replacement of the battery for the Subaru Outback key remote.
Subaru Outback (2014-2019 / BS, MK 5) Today we will discover the instructions that will allow us to replace the battery of the Subaru Outback key remote. First, let's take our remote and …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos