Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Subaru Outback?

Model: Subaru Outback MK 4, BM, BR - Years 2009-2014
Part: Key

Replacing the remote battery of the Subaru Outback, as shown in this tutorial, is an extremely simple and cost-effective task. You will only need a replacement CR1620 battery and a small flathead screwdriver. First, locate the slot along the bottom edge of the remote, right on the ring, then insert the screwdriver into the slot and pry the two halves apart. Once done, remove the old battery and insert the new one, ensuring it is positioned the correct way.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery in a Subaru Outback
How to Replace the Remote Battery in a Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) To replace the remote battery in a Subaru Outback, use a tool to pry open the slot located in the central lower part of the remote: this will allow y…
How to Replace the Remote Battery in a Subaru Outback
How to Replace the Remote Battery in a Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) In this short and simple video, learn how to disassemble and replace the battery in the remote key for the Subaru Outback. First, take your remote an…
How to Replace the Remote Battery in a Subaru Outback?
How to Replace the Remote Battery in a Subaru Outback?
Subaru Outback (2014-2019 / BS, MK 5) Replacing the remote battery in a Subaru Outback is a straightforward and cost-effective task. You only need a replacement CR2032 battery. First, ext…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos