Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Pads

Model: Subaru Forester MK 2, SG - Years 2002-2008
Part: Brake pads

Loosen the wheel nuts and lift the vehicle, securing it safely. Unscrew the bolts and remove the wheel. Disconnect the electrical cable. Unscrew the two retaining screws of the caliper and remove it. Check the wear condition of the clips and the piston. Clean the entire braking assembly with alcohol or deoxidising spray and dry with compressed air. Grease the mounting pins and reposition the piston, ensuring proper operation. Install the new pads, paying attention to the direction of rotation and installing the one with contacts facing inwards. Reattach the caliper and reconnect the electrical cable. Ensure the pads are properly seated against the disc. Recheck the brake fluid level. Re-establish the position of the pistons by pressing the brake pedal.

Updated on 5 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replace the front brake pads on the Subaru Forester MK4
Replace the front brake pads on the Subaru Forester MK4
Subaru Forester (2012-2019 / SJ, MK 4) We see below the instructions necessary for the disassembly and replacement of the front brake pads on the Subaru Forester fourth series. Let's start…
Replacement of the front bumper of the Subaru Forester
Replacement of the front bumper of the Subaru Forester
Subaru Forester (2012-2019 / SJ, MK 4) Today we will discover the main information useful for disassembling and replacing the front bumper of the Subaru Forester. First, we open the hood o…
How to replace the brake discs and pads of the Subaru Forester.
How to replace the brake discs and pads of the Subaru Forester.
Subaru Forester (2002-2008 / MK 2, SG) To replace the front brake discs and pads of the Subaru Forester, lift the front of the car, remove the right front wheel; with a 14mm socket wrench …

Other guides you may be interested in

How to Replace the Timing Belt on a Chevrolet Matiz

How to replace the timing belt on a Chevrolet Matiz. Open the bonnet and secure it, lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner). Use a fixed spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket spanner to undo the securing bolt of the tensioner pulley, then remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket spanner. Finally, refit the rivets along with the wheel arch liner and reattach the wheel with the tyre to the vehicle.

Watch the video!


by ScegliAuto

More videos