Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on the Subaru Forester 2

Model: Subaru Forester SG, MK 2 - Years 2002-2008
Part: Brake pads

This video shows how to remove and replace the brake pads, whether front or rear, on the second series Subaru Forester. First, lift the vehicle and remove the wheel by unscrewing the bolts; then, unscrew the bolts of the brake caliper to remove it, as illustrated in the video. At this point, extract the old pads and replace them with new ones (of the correct type and original spare); clean the brake caliper of any residual dirt and lever the caliper piston. Insert the new pads and reassemble everything!

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Brake Pads on the Subaru Forester MK4
Replacing the Front Brake Pads on the Subaru Forester MK4
Subaru Forester (2012-2019 / MK 4, SJ) Below are the instructions necessary for removing and replacing the front brake pads on the fourth generation Subaru Forester. Start by lifting the v…
How to Locate the Fuses and Understand Their Schematics in a Subaru Forester
How to Locate the Fuses and Understand Their Schematics in a Subaru Forester
Subaru Forester (1997-2002 / SF, MK 1) The first fuse panel in a Subaru Forester can be found inside the vehicle's cabin, located at the bottom left of the steering wheel, behind the dashb…
How to Replace the Brake Discs and Pads on the Subaru Forester
How to Replace the Brake Discs and Pads on the Subaru Forester
Subaru Forester (2002-2008 / SG, MK 2) To replace the front brake discs and pads on the Subaru Forester, lift the front of the car and remove the right front wheel. Using a 14mm socket, fi…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos