Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Quickly Install the Anti-Roll Bar

Model: Subaru Impreza MK 4 - Years 2011-2016
Part: Anti-roll bar

The anti-roll bar serves, as the name suggests, to limit the roll of the car in bends; in this guide, we will see the steps to install it.
Open the boot, remove all items inside, take off the double floor cover, and resting the bar on top, take measurements to mark the side notches on the upholstery that will house the arms of the bar.
Next, locate the bolts to be unscrewed as indicated in the video, and once unscrewed, replace the protection, apply the bar, and screw in the new bolts. At this point, take the car for a drive and check again that the bolts are tightened.

Updated on 1 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Stabiliser Link
Replacing the Stabiliser Link
Subaru Impreza (2011-2016 / MK 4) .. To replace the link connecting the anti-roll bar to the suspension wishbone, lift the vehicle on suitable axle stands and remove the front wheel... …
Differential Oil Seal Replacement
Differential Oil Seal Replacement
Subaru Impreza (2011-2016 / MK 4) .. connecting the suspension wishbone to the anti-roll bar and then the end of the wishbone connected to the wheel hub; also remove the brake caliper,.. …
How to Replace the Air Filter of the Subaru Impreza
How to Replace the Air Filter of the Subaru Impreza
Subaru Impreza (2016-2023 / MK 5) Replacing the air filter on your 2017 Subaru Impreza is a task that anyone can carry out independently. With the following mini guide, you will be ab…

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos