Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on Subaru XV

Model: Subaru Xv MK 1 - Years 2012-2017
Part: Spark plugs

In this video tutorial, you will learn how to remove and replace the spark plugs on a Subaru XV engine by following these main instructions. First, open the bonnet and disconnect the battery by removing the two terminals (positive and negative); then, remove the ignition leads from the spark plugs on the right side and use a socket wrench with an extension to take them out, as shown in the video. Screw in the new spark plugs by hand first, then tighten them with a torque wrench; finally, replace the other two opposite spark plugs, following the tutorial to the end!

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Spark Plugs on Subaru XV 1.6 Petrol
Replacing Spark Plugs on Subaru XV 1.6 Petrol
Subaru Xv (2012-2017 / MK 1) In today's video tutorial, you will learn how to remove and replace the spark plugs on a Subaru XV 1600cc, following these simple instructions. First…
How to Replace the Key Battery of a 2020 Subaru
How to Replace the Key Battery of a 2020 Subaru
Subaru Xv (2012-2017 / MK 1) The procedure for replacing the battery of a Subaru key/remote is the same for all vehicles from the same manufacturer. Today, we will specifically l…
Replacing the Air Filter on a Subaru XV
Replacing the Air Filter on a Subaru XV
Subaru Xv (2012-2017 / MK 1) As part of the regular maintenance for the Subaru XV, you need to replace the air filter element, which is important for keeping your engine efficien…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos