Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Subaru Impreza

Model: Subaru Impreza MK 4 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Air filter

See other generations:
Video tutorial

The air filter located in the engine bay of your Subaru Impreza Mk4 is one of the most important components, as it allows the engine to "breathe" properly. This helps prevent any abnormal overheating and preserves the engine's performance.

After driving many miles, it is essential to replace the entire filter. Below, you will discover how to do this.

First, ensure the engine is off and cold. Fully lift the front bonnet and locate the filter box on the left side of the engine bay. Open the two metal clips present and lift the top of the box. Remove the old filter and insert the new one. Finally, close the clips and the bonnet.


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Subaru Impreza 4
How to Replace the Cabin Air Filter on a Subaru Impreza 4
Subaru Impreza (2011-2016 / MK 4) In this guide for your Subaru Impreza Mk4 (2012-2016), you will learn the steps to independently replace the cabin air filter. First, enter the cabin…
Removing the Engine Air Filter on a Subaru Impreza
Removing the Engine Air Filter on a Subaru Impreza
Subaru Impreza (2011-2016 / MK 4) How do you remove the engine air filter on a Subaru Impreza? Let's see how to do it after opening the engine bay. Once the front bonnet is lifted, lo…
How to Replace the Air Filter of the Subaru Impreza
How to Replace the Air Filter of the Subaru Impreza
Subaru Impreza (2016-2023 / MK 5) Replacing the air filter on your 2017 Subaru Impreza is a task that anyone can carry out independently. With the following mini guide, you will be ab…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos