Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of the Subaru Ascent

Model: Subaru Ascent MK 1 - Years 2018-2026
Part: Key

If you need to replace the battery of your vehicle's key, follow these instructions and refer to the video tutorial. First, get a small screwdriver and insert it into the joint space between the key cover and the base to pry it open. Once the cover is removed, there is a compartment on the side of the block that contains the buttons. Gently pry with the screwdriver on the two clips on the side to open it. Remove the battery compartment and replace it with an equivalent CR 2016 model. Then, place the new battery in the compartment and reinsert it into the remote. Finally, reattach the key cover, and you're done.

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Subaru Ascent remote control?
How do you replace the battery of the Subaru Ascent remote control?
Subaru Ascent (2018-2026 / MK 1) In order to replace the battery of the Subaru Ascent, you need to remove the key located at the bottom of the device, so that you can access its hous…
How to Replace the Key Fob Battery for the Subaru Ascent
How to Replace the Key Fob Battery for the Subaru Ascent
Subaru Ascent (2018-2026 / MK 1) If you need to replace the button cell battery inside your Subaru Ascent key fob, just follow the steps outlined in this mini guide. The entire proce…
Replace Engine Oil and Oil Filter on Subaru Ascent
Replace Engine Oil and Oil Filter on Subaru Ascent
Subaru Ascent (2018-2026 / MK 1) Follow these steps to perform routine maintenance by replacing the engine oil and oil filter on your Subaru Ascent. First, lift the vehicle and start…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos