Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the steering wheel of the Subaru Outback MK3

Model: Subaru Outback BP, MK 3, BL - Years 2003-2009
Part: Steering wheel

In today's video we will see the procedure necessary to disassemble and replace the steering wheel of the third series Subaru Outback, in simple steps. First of all we open the bonnet and start by first disconnecting our battery; we go inside the car and unscrew the screws that we find behind the steering wheel, using a torx key, as shown in the video. At this point, remove the airbag by disconnecting the two electrical connectors on the back; then we use a socket wrench with extension to unscrew the central nut of the steering wheel, in order to remove it!

Posted on 28 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How to remove the steering wheel and the airbag of the Subaru Outback
How to remove the steering wheel and the airbag of the Subaru Outback
Subaru Outback (2009-2014 / MK 4, BM, BR) Today we will see, in this video tutorial, how to remove and replace the steering wheel and its airbag of the Subaru Outback, following the instructi…
Subaru Outback wiper lever replacement
Subaru Outback wiper lever replacement
Subaru Outback (2003-2009 / BP, MK 3, BL) Let's see in this guide how to remove and replace the wiper lever on the Subaru Outback, following these simple steps. First of all we get on board t…
How do I remove the Subaru Outback steering wheel airbag?
How do I remove the Subaru Outback steering wheel airbag?
Subaru Outback (2009-2014 / MK 4, BM, BR) In order to remove the front airbag of the Subaru Outback positioned on the steering wheel, you must first disconnect the terminals connected to the …

Other guides you may be interested in

How to Remove the Distributor from a Fiat Panda

How to remove the distributor from a Fiat Panda? Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation pipe, remove the engine soundproofing panel and the cap (detach it). Start by unscrewing the fastening pins of the distributor (as shown in the video); remove the distributor from the engine housing. Install a new distributor inside the engine bay, connect the various cables and close with the cap. Refit all previously removed parts (soundproofing panel, filter, etc.) and test the correct operation.

Watch the video!


by ScegliAuto

More videos