Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Subaru Outback remote control?

Model: Subaru Outback MK 6, BT - Years 2020-2025
Part: Key

In this tutorial we can see how to replace the battery of the Subaru Outback remote control, an extremely simple and quick operation. To do this we will need a small flat-tipped screwdriver and a replacement battery of type CR2032. First of all, we extract the emergency metal key by pressing the appropriate button, then we insert the screwdriver into the indicated slot, lever and separate the rear door. We then remove the old battery, insert the replacement being careful to respect the polarity and reassemble everything following the reverse procedure.

Posted on 26 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Subaru Outback key remote control
How to replace the battery of the Subaru Outback key remote control
Subaru Outback (2009-2014 / MK 4, BM, BR) Today we will discover how to disassemble and replace the battery of the key remote for the Subaru Outback. First, take the remote in hand and start …
How to replace the battery of the Subaru Outback remote control?
How to replace the battery of the Subaru Outback remote control?
Subaru Outback (2020-2025 / MK 6, BT) .. In this tutorial we can see how to replace the battery of the Subaru Outback remote control, an extremely simple and quick operation... …
Replacement of the battery for the Subaru Outback key remote.
Replacement of the battery for the Subaru Outback key remote.
Subaru Outback (2014-2019 / BS, MK 5) Today we will discover the instructions that will allow us to replace the battery of the Subaru Outback key remote. First, let's take our remote and …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos