Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front brake pads of the Subaru Outback MK4

Model: Subaru Outback MK 4, BM, BR - Years 2009-2014
Part: Brake pads

Let's see in this video how to remove and replace the front brake discs and pads of the Subaru Outback fourth series, following the instructions below. First we lift the car and remove the front wheel; then we go to unscrew the fixing screws of the front brake caliper, levering on the piston to make it retract. Once the caliper has been removed, we can extract the old brake pads, replacing them with the new ones; if necessary, we also replace the front brake disc, and then clean the caliper from dirt. Finally reassemble everything!

Posted on 11 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on a Subaru Outback
How to reset the tire pressure warning light on a Subaru Outback
Subaru Outback (2009-2014 / MK 4, BM, BR) Before we can begin, we will have to get out of the cockpit of our Subaru Outback. So let's start by checking and eventually inflating the tires of t…
How to replace the heating resistor in the Subaru Outback?
How to replace the heating resistor in the Subaru Outback?
Subaru Outback (2009-2014 / MK 4, BM, BR) In this tutorial we can see how to replace the heating resistor in the Subaru Outback, an extremely simple and quick operation. First of all, make su…
How to replace the cabin filter on the Subaru Outback?
How to replace the cabin filter on the Subaru Outback?
Subaru Outback (2009-2014 / MK 4, BM, BR) In order to replace the cabin filter of the Subaru Outback, you need to open the glove box located on the passenger side: once this has been opened, …

Other guides you may be interested in

How to Replace the Interior Light Bulbs on a Jeep Renegade

Let’s see how to replace the damaged bulbs in the interior light of a Jeep Renegade. Use a screwdriver to pry between the interior light and the headlining panel (without breaking the panel), pull the interior light out from the panel and disconnect the power connector. Replace the damaged bulbs with new ones (same size and voltage). Refit the interior light into its housing (push the clear plastic with your hands until the clips are fully engaged in the side plastic). Test the correct operation of the bulbs in the interior light after installation.

Watch the video!


by ScegliAuto

More videos