Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the heating resistor in the Subaru Outback?

Model: Subaru Outback BR, BM, MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial we can see how to replace the heating resistor in the Subaru Outback, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work in complete safety, then go to the passenger side and remove the cover located under the glove compartment.

Next, locate the resistor, disconnect the power connector and unscrew the two fixing screws with a cross-tip screwdriver. At this point, all that remains is to remove the resistor, insert the replacement and follow the reverse procedure.


Posted on 3 February 2025 by ScegliAuto


Related tutorials

How the Heating and Air Conditioning Work in the Subaru Outback
How the Heating and Air Conditioning Work in the Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) Before starting to understand how the heating and air conditioning work in the Subaru Outback, secure your vehicle on a ramp or a flat surface, well …
How to replace the battery of the Subaru Outback remote control?
How to replace the battery of the Subaru Outback remote control?
Subaru Outback (2020-2025 / MK 6, BT) In this tutorial we can see how to replace the battery of the Subaru Outback remote control, an extremely simple and quick operation. To do this we w…
How to Reset the Tyre Pressure Warning Light on a Subaru Outback
How to Reset the Tyre Pressure Warning Light on a Subaru Outback
Subaru Outback (2009-2014 / BR, BM, MK 4) Before you begin, exit the cabin of your Subaru Outback. Start by checking and inflating the car's tyres until they all reach the correct pressure. N…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos