Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel in the Subaru Forester?

Model: Subaru Forester SH, MK 3 - Years 2008-2011
Part: Door trim panel

First, we remove the caps in the handle and handle and extract the screws that are under them. We then extract the glove box from the handle, disconnect the plug and also remove the frame of the handle which is installed interlocking. At this point we just have to remove the door panel which is held in place only by interlocking mechanisms as we removed the only two screws at the beginning. To do this we can only use our hands but if we have difficulty we do not hesitate to help us with a flat object to pry along the edges of the panel.

Posted on 13 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear hatch panel of the Subaru Forester.
How to remove the rear hatch panel of the Subaru Forester.
Subaru Forester (2008-2011 / SH, MK 3) In this guide, we will see the instructions that will allow us to disassemble and remove the interior trim of the rear hatch of the Subaru Forester. …
How to Remove the Door Panel on a Subaru Forester
How to Remove the Door Panel on a Subaru Forester
Subaru Forester (2002-2008 / SG, MK 2) Remove the left front door panel of a Subaru Forester. Disconnect the battery terminals located in the engine bay. Using a screwdriver, unscrew the s…
How to remove the exterior door handle of the Subaru Forester
How to remove the exterior door handle of the Subaru Forester
Subaru Forester (2002-2008 / SG, MK 2) Let's see in this guide the steps that will allow us to remove and replace the exterior door handle of the Subaru Forester, following the instruction…

How to Remove the Cabin Filter from a Nissan Juke

In this video, let’s see how to remove the cabin air filter from a Nissan Juke. Open the glove compartment and unclip the end stop arms. Then, use a screwdriver to remove the securing screws. After completing the previous steps, unscrew the side screws in the glove compartment and remove the plastic cover. Unscrew the screws again, and after disconnecting the power cables, pull the glove compartment away from the dashboard. Then, slide the air filter out of its housing as shown in the video. Insert the new filter and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos