Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Lights in the Subaru Ascent

Model: Subaru Ascent MK 1 - Years 2018-2026
Part: Interior dome light bulb

In this video tutorial, you will see how to remove and replace the interior lights in the Subaru Ascent in simple and quick steps. First, get inside the vehicle and start removing the small plastic dome lights found on the ceiling using a very thin pry tool; then detach and remove the small bulb or capsule bulbs inside the housing, as shown in the video. At this point, replace the bulb with a new one, inserting it in the correct direction; replace all the other interior lights in the same manner!

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a Subaru Ascent?
How to Replace the Cabin Air Filter on a Subaru Ascent?
Subaru Ascent (2018-2026 / MK 1) To replace the cabin air filter on a Subaru Ascent, open the glove compartment located on the passenger side to release the internal fastening clips.…
How to Replace the Cabin Air Filter in the Subaru Ascent?
How to Replace the Cabin Air Filter in the Subaru Ascent?
Subaru Ascent (2018-2026 / MK 1) In this tutorial, you will see how to replace the cabin air filter in the Subaru Ascent, an extremely simple and quick operation. First, go to the pa…
How to Replace the Cabin Filter on a Subaru Ascent?
How to Replace the Cabin Filter on a Subaru Ascent?
Subaru Ascent (2018-2026 / MK 1) To replace the cabin filter on the Subaru Ascent, open the glove compartment on the passenger side: once the compartment is open, locate the two side…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos