Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Subaru Crosstrek

Model: Subaru Crosstrek MK 2 - Years 2018-2023
Part: Battery

To replace the battery in this vehicle, use the images from the video and follow the steps described below. First, open the hood and locate the battery on the right side of the compartment. Next, remove the nuts securing the upper cover, then disconnect the negative terminal first, followed by the positive terminal. After that, remove the old battery and place the new one in its position, reconnecting the positive terminal first and then the negative terminal.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Subaru Crosstrek
How to Replace the Battery on a Subaru Crosstrek
Subaru Crosstrek (2018-2023 / MK 2) To replace the battery on a Subaru Crosstrek, open the hood to access the battery located in the engine compartment near the left headlight. Loosen t…
What is the fuse layout of the Subaru Crosstrek?
What is the fuse layout of the Subaru Crosstrek?
Subaru Crosstrek (2018-2023 / MK 2) In this video we can see where the fuse boxes of the Subaru Crosstrek are located and what their respective diagrams are, to consult in case we need …
How to Replace the Battery in a Subaru Crosstrek Remote?
How to Replace the Battery in a Subaru Crosstrek Remote?
Subaru Crosstrek (2018-2023 / MK 2) In this tutorial, you will see how to replace the battery in a Subaru Crosstrek remote. For this simple and quick operation, you will only need a sma…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos