Do it yourself
| ||||
|
Subaru Crosstrek - Video tutorial
Model: Subaru Crosstrek
MK 2
- Years 2018-2024 To be able to replace the battery of the Subaru Crosstrek you have to go and open the bonnet, so that you can locate the device inside the engine compartment, in correspondence with the left front headlight. Here it will be necessary to loosen the screws that fix it inside its housing and the appropriate power cables will also have to be disconnected. In this way the old battery can be removed from its seat and replaced with a new one; the latter must be suitably inserted in its housing, fixing it with the appropriate screws and connecting the power cables.
Posted on 19 May 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.048
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |