Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Identify Safe Lifting Points for the Subaru Outback

Model: Subaru Outback BS, MK 5 - Years 2014-2019
Part: Suspension system

To lift a Subaru Outback for repairs on the underside of the vehicle, locate the safe attachment points for the lifting supports. These points are near the tyres, generally between the area under the front wheels and above the rear wheels. Check for any easily deteriorable equipment in these areas. Take care not to place the supports near these components to avoid potential issues and failures.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Subaru Outback
How to Reset the Tyre Pressure Warning Light on a Subaru Outback
Subaru Outback (2009-2014 / MK 4, BM, BR) Before you begin, exit the cabin of your Subaru Outback. Start by checking and inflating the car's tyres until they all reach the correct pressure. N…
How to Change the Time on a Subaru Outback?
How to Change the Time on a Subaru Outback?
Subaru Outback (2014-2019 / BS, MK 5) Good morning, today’s goal is to modify the time on the onboard computer of your Subaru Outback. Start by sitting in the driver’s seat of the vehicle…
Where is the Fuse Box Located in the 2006 Subaru Outback?
Where is the Fuse Box Located in the 2006 Subaru Outback?
Subaru Outback (2003-2009 / BL, BP, MK 3) This guide provides a simple procedure to locate the fuse box containing all the various fuses in your 2006 Subaru Outback. First, enter the vehicle …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos