Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Anti-Roll Bar Link

Model: Subaru Outback BL, BP, MK 3 - Years 2003-2009
Part: Control arm

This guide explains how to replace the rear anti-roll bar link on your car. Position your car on a lift and raise it off the ground. Next, go under your car with the appropriate spanner and begin to dismantle the bar using pliers. Once you have created some space, use a crowbar to help leverage it towards you and then undo the last bolt. After removing all the bolts, slide the piece out by moving it slightly up and down, then pull it towards you. Take your replacement part and refit everything in reverse order, and your job is done.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Hub Bearing
Replacing the Rear Hub Bearing
Subaru Outback (2009-2014 / BR, BM, MK 4) Replacing the rear hub bearing requires disassembling all components connected to the hub; start by lifting the vehicle and removing the rear wheel; …
How do you replace the rear headlight bulb on a Subaru Outback?
How do you replace the rear headlight bulb on a Subaru Outback?
Subaru Outback (2009-2014 / BR, BM, MK 4) To replace the rear headlight bulb of the Subaru Outback, open the rear hatch to access the inside. There will be a protective panel that needs to be…
Replacement of the rear headlight bulbs of the Subaru Outback
Replacement of the rear headlight bulbs of the Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) Through this process, we will discover the steps that will allow us to disassemble and replace the rear headlight bulbs of the Subaru Outback. First …

How to Remove the Center Console on a Mercedes C-Class

Let's see how to remove the center console on a Mercedes C-Class. Use a plastic trim tool to pry off the cover located at the bottom of the center console. Remove the leather shift boot along with its plastic frame. After removing the cover, unscrew the fastening screws located at the top of the center console with a screwdriver. Once this is done, pull the console away and disconnect the power cables for the knob. Finally, insert the new piece into the center console area and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos