Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time on the Suzuki Swift - Maruti Swift

Model: Suzuki Swift MK 6, A2L - Years 2017-2024
Part: Clock

Following these brief and simple instructions, we will see how to change the time on the display of the instrument panel on the Suzuki Swift and the Maruti Swift. First of all, get into the car and start by pressing and holding the button located on the left side of the instrument panel; you will then see the clock display flashing, as shown in the video. At this point, use the right button on the panel to set the hour first and then the minutes; then exit the settings to save the changes made, finally turning off the instrument panel and starting the engine!

Posted on 4 July 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the rear tail light of the Suzuki Swift - Maruti Swift
How to replace the rear tail light of the Suzuki Swift - Maruti Swift
Suzuki Swift (2017-2024 / MK 6, A2L) .. taillight of the Suzuki Swift, as well as the Maruti Swift. First, we open the rear trunk door and begin to unscrew the fixing screws we find on the.. …
How to set the time on the Suzuki Swift
How to set the time on the Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) .. of the instrument panel of the Suzuki Swift and Maruti Swift. First of all, we get on board the car and start up the instrument panel; then we use the.. …
How to set the time on the Suzuki Swift
How to set the time on the Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) In the following guide, we will discover together how to manually change the time displayed on the instrument panel of your Suzuki Swift. First of al…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos