Do it yourself
| ||||
|
Suzuki Baleno - Video tutorial
Model: Suzuki Baleno
MK 2
- Years 2015-2020 How to change the fuel filter on a Suzuki Baleno? Let's see how to proceed in this video. Let's lift the bonnet and put it in safety. With a socket wrench we unscrew the fuel filter nuts and remove them (behind the battery). We unhook the filter from its housing and disconnect the various circulation pipes. Once the filter has been removed, remove it from the car (replace it with a new filter). Finally we reassemble the filter in the specific housing (we connect pipes and cables) and tighten the pins. We close the front hood after maintenance. We start the car to check that it is working correctly.
Posted on 19 November 2023 by ScegliAuto
Other guides that may interest you |
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |