Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Starter Motor in a Suzuki Samurai

Model: Suzuki Samurai JB, JA, Sj40, Sj30 - Years 1989-2003
Part: Starter motor

In this video, you will learn how to remove and replace the starter motor on a Suzuki Samurai. This is a fairly simple task that will save you a lot of money compared to what a mechanic would charge. After locating the position of the part near the engine on the driver's side, use the appropriate spanner to unscrew the three bolts and disconnect the connector linked to the starter motor, which can then be removed by simply rotating and pulling it out. Once done, you can repair the old starter motor or replace it with a new one and refit it by following the same procedure in reverse.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Piston Rings on a Suzuki Samurai
How to Change the Piston Rings on a Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) In this video tutorial, you will learn how to remove and replace the piston rings on a Suzuki Samurai, following the instructions below. To carry out…
Replacing Front Headlights on a Suzuki Samurai
Replacing Front Headlights on a Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) In today's video, we will see how to remove and replace the original headlights on a Suzuki Samurai, following these simple steps. First, open the bo…
Guide to replacing the timing belt of the Suzuki Samurai
Guide to replacing the timing belt of the Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) The following steps will show us how to disassemble and replace the timing belt of the Suzuki Samurai, following the instructions below. First, open …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos