Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Suzuki Swift

Model: Suzuki Swift MK 4, Rs41 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Spark plugs

See other generations:
Video tutorial

Before you can begin, open the bonnet of your Suzuki Swift. Start by unscrewing and removing the screws that secure the air filter housing and its associated hoses, then remove the air filter housing itself.

Once done, you will also need to remove the engine cover. At this point, disconnect the spark plug leads and then extract the corresponding rubber caps.

This will give you access to the spark plugs. Proceed to unscrew and remove them, completing the disassembly.

To fit the new spark plugs and reassemble everything, simply follow this procedure in reverse, and the replacement will be complete.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to Replace Engine Spark Plugs on a Suzuki Swift 1.3 MK3
How to Replace Engine Spark Plugs on a Suzuki Swift 1.3 MK3
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) In this video tutorial, you will see how to remove and replace the engine spark plugs on a third-generation Suzuki Swift. First, open the engine bonn…
How to Replace the Spark Plugs on a Suzuki Swift?
How to Replace the Spark Plugs on a Suzuki Swift?
Suzuki Swift (2004-2010 / MK 4, Rs41) To replace the spark plugs on a Suzuki Swift, open the bonnet to access the screws securing the plastic cover on top of the engine block. Once the co…
Guide to Replacing the Glow Plugs on the Suzuki Swift 1.3 DDIS
Guide to Replacing the Glow Plugs on the Suzuki Swift 1.3 DDIS
Suzuki Swift (2004-2010 / MK 4, Rs41) Today's steps will show you how to remove and replace the glow plugs on the Suzuki Swift 1.3 DDIS engine. First, open the bonnet of the vehicle and l…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos