Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Suzuki Swift

Model: Suzuki Swift Rs41, AZG, MK 5 - Years 2010-2017
Part: Service warning light

To quickly and correctly reset the engine oil light on a Suzuki Swift, first insert the key and turn on the ignition. Then, locate the small button inside the speedometer (at the bottom) and hold it down for at least three seconds. At this point, the display will start to flash. Once it stops flashing, release the button and turn off the ignition. The oil light reset is complete and it will not come on again at the next start. If there are any errors, you can easily repeat the procedure from the beginning.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Warning Light on Suzuki Swift
How to Reset the Warning Light on Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Reset the service light on a Suzuki Swift? Here's how to reset the oil service warning light. Turn on the instrument cluster of the Suzuki with the k…
How to reset the Service light on the Suzuki Swift?
How to reset the Service light on the Suzuki Swift?
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) To clear the Service light on the Suzuki Swift, first activate the display by inserting the ignition key into the corresponding slot. Once the dashbo…
How to reset the service light on a 2014 Suzuki Swift.
How to reset the service light on a 2014 Suzuki Swift.
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) In the following guide, we will explain step by step how you can complete the manual reset of the service light on your Suzuki Swift (2014 model). Be…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos