Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the Suzuki Jimny?

Model: Suzuki Jimny Jb23, Jb33, Jb43, Jb53 - Years 1998-2018
Part: Timing belt

To replace the timing belt on the Suzuki Jimny, open the bonnet to access the front of the engine bay, where the pulleys are located. These can be loosened, along with the tensioner roller, to reduce the tension on the belt for removal. Once the old belt is removed, insert a new spare part and tighten the pulleys and the tensioner roller again. After installation, close the bonnet and check that the new device functions correctly.

Updated on 5 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Guide to Replacing the Timing Belt of the Suzuki Jimny 1
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) This guide outlines the main steps and instructions for replacing the timing belt of the first series Suzuki Jimny; typically, the timing belt should…
How to Replace the Auxiliary Belt on a Suzuki Jimny
How to Replace the Auxiliary Belt on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Before you can start, open the bonnet of your Suzuki Jimny. Begin by loosening the tensioner by slightly unscrewing the fixing bolt. This will free t…
How to Replace the Timing Belt on a Suzuki Jimny
How to Replace the Timing Belt on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Loosen the tensioner bolt with a double-ended spanner (15x16 or 16x17), as you won't be able to access it otherwise. This hexagon is 16mm and is loca…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos